• You've just added this product to the cart:

    Vauxhall F23/M32 Gearbox Cooler Kit

    0 out of 5

    Vauxhall F23/M32 Gearbox Cooler Kit

    Vauxhall Gearbox Cooler Kit

     

    • SETRAB Oil Cooler.
    • AN Fittings and PTFE lines throughout for reliability (Colour Options Available).
    • Quality gear driven pump.
    • Additional Wiring Required
    • Professional Installation Recommended

     

    This Gearbox Oil Cooler kit is aimed towards Motorsport applications. The main weakness of the M32 gearboxes for example, is earlier variations suffer from bearing failure due to a lack of lubrication to case end bearings caused by a low lubrication capacity and overheating. This was partly rectified in the later boxes were revised with larger case end bearings. However, these revised gearboxes are still prone to failure.

     

    This kit will allow you to run a remote oil cooler and pump allowing an increase in lubrication capacity. The increase in capacity also helps reduce the temperature of the gearbox fluid, reducing the risk of gearbox failure.

     

    (Please note the image is a representation of part of the kits contents – Image will be updated once another kit has been built)

     

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 3-4 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £350.00
  • You've just added this product to the cart:

    Vauxhall F23/M32 Gearbox Breather Kit (AN Version)

    0 out of 5

    Vauxhall F23/M32 Gearbox Breather Kit (AN Version)

    Vauxhall Gearbox Breather Kit

    AN Fitting Version

    These gearbox breather kits, relocate the breather on the gearbox, to a new, higher point in the engine bay. Blanking off the Factory breather hole and using our unique tank allows you to overfill the gearbox approx 0.5-1 liter, in turn protecting and pro-longing the life and reliability of your gearbox by increasing cooling capacity through the means of additional transition fluid.

    Kit comes with all necessary fixtures and fittings.

    Unfortunately, we cannot offer any colour options for the 80mm tank filters. They are an Un-Dyed cotton and could easily be dyed to a colour of your choice.

    Some drilling may be required.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £90.00£105.00
  • You've just added this product to the cart:

    Vauxhall F23/M32 Gearbox Breather Kit (Silicone Version)

    0 out of 5

    Vauxhall F23/M32 Gearbox Breather Kit (Silicone Version)

    Vauxhall Gearbox Breather Kit

    These gearbox breather kits, relocate the breather on the gearbox, to a new, higher point in the engine bay. Blanking off the Factory breather hole and using our unique tank allows you to overfill the gearbox approx 0.5-1 liter, in turn protecting and pro-longing the life and reliability of your gearbox by increasing cooling capacity through the means of additional transition fluid.

    Kit comes with all necessary fixtures and fittings.

    Unfortunately, we cannot offer any colour options for the 80mm tank filters. They are an Un-Dyed cotton and could easily be dyed to a colour of your choice.

    Some drilling may be required.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £70.00£85.00
  • You've just added this product to the cart:

    Vauxhall VXR Catch Tank Kit

    0 out of 5

    Vauxhall VXR Catch Tank Kit

    Vauxhall VXR Catch Tank Kit

    • Suitable for both the Astra VXR and Zafira VXR
    • This kit is an Atmospheric type with top mount flush fit filter.
    • 3 Stage Internal Baffle

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £65.00£80.00
  • You've just added this product to the cart:

    Vauxhall Z20 Top Hat

    0 out of 5

    Vauxhall Z20 Top Hat

    Vauxhall Z20 Top Hat

    • TIG Welded 2.5″ Stainless Steel Top Hat
    • Comes with 4 new Stainless Steel bolts

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £45.00
  • You've just added this product to the cart:

    Vauxhall Z20 Top Hat Kit

    0 out of 5

    Vauxhall Z20 Top Hat Kit

    Vauxhall Z20 Top Hat Kit

    2.5″ Stainless Steel Top Hat and MAP Tube Kit
    Silicone Joiners x 2
    Stainless Clamps x 4
    Stainless Top Hat bolts x 4

    Suitable for aftermarket intercoolers (Such as an Airtec etc)

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £165.00
  • You've just added this product to the cart:

    Vauxhall Z20 Cross Over Delete Intake Kit

    0 out of 5

    Vauxhall Z20 Cross Over Delete Intake Kit

    Vauxhall Z20 Cross Over Delete Intake Kit

     

    This Intake kit is only suitable for the standard frame turbos (K04, K06 etc)

     

    This intake kit allows you to remove the plastic MAF Sensor housing, and plug the MAF Sensor directly in the aluminium housing making a cleaner look.

     

    We recommend having the vehicle remapped to take advantage of the increased airflow.

     

    We offer 2 sizes

    • 80mm Version for VXR Sized 80mm MAF
    • 90mm Version for High Power Applications using a 90mm MAF (330+bhp)

     

    Kit Includes.

    • Aluminium Intake Tube x 1.
    • Silicone Joiner x 1
    • Stainless Clamps x 3
    • Vibrant Performance Air Filter x 1
    £135.00£165.00
0

Your Cart