- Additional information
Vauxhall Z20 Garrett Conversion Intake
Designed to be used with Garrett or similar Conversions
1 x Aluminium Intake Tube x 1 (With or Without MAF)
1 x Silicone Joiner
1 x 1/4 NPT Port with 6mm Elbow
1 x Optional Recirc Port (See Below)
1 x Optional PCV Port (See Below)
3 x Clamps
1 x Air Filter (Optional)
Its important to note that the vehicle will require a remap to fit this intake. its important that you do not fit this intake until the vehicle is being mapped. failure to do so can cause serious damage to your engine.
These are universal intakes, whilst they are designed to fit most setups, you may find you need to trim the supplied silicone hose to suit your particular setup.
WITH MAF – The tube is supplied with a welded fitting to accept the factory MAF Sensor directly into the tube
WITHOUT MAF – The tube is not supplied with a welded fitting, the tube is shorted to allow you to use a plastic MAF Housing. Please note because the tube is shortened, we will not be able to weld a MAF fitting in at a later date.
RECIRC PORT – This is if you are using an external re circulation valve on your setup. using this option will have a 32mm port on the underside to connect your valve. (No fittings supplied)
PCV PORT – This is the port that would connect to the breather port on the rocker cover. (No Fittings Supplied)
Please take extra care to understand and select your options when ordering. Mistakes cannot be rectified once delivered.
Please note before your purchase. These are not stocked and are made to order, therefore please allow up to 3-4 weeks for your order to arrive.
With MAF Boss, Without MAF Boss (MAF-Less)
|Recirc Take off||
Black, Blue, Red
76mm, 100mm, Other (Please Specify During Checkout)
Brushed, Gloss Black