Shop

  • You've just added this product to the cart:

    TD04/5 Turbo Inlet Flange

    New
    0 out of 5

    TD04/5 Turbo Inlet Flange

    TD04/5 Turbo Inlet Flange

    10mm Lazer cut mild steel

    Center hole is 42mm, perfect for 1.25″ SCH10 tubing

    £20.00
  • You've just added this product to the cart:

    Nissan Micra CG Exhaust Flange

    New
    0 out of 5

    Nissan Micra CG Exhaust Flange

    Nissan Micra CG Exhaust Flange

     

    10mm Lazer Cut Mild Steel, or 8mm 304 Stainless Steel

     

    These are Lazer Cut to order, please allow 1-2 weeks for Mild Steel, and 2-3 Weeks for Stainless Steel.

    £30.00£45.00
  • You've just added this product to the cart:

    1.25" SCH10 45 Elbow

    New
    0 out of 5

    1.25″ SCH10 45 Elbow

    1.25″ SCH10 45 Elbow

    304 Stainless Steel

    Long Radios

    £4.50
  • You've just added this product to the cart:

    1.25" SCH10 90 Elbow

    New
    0 out of 5

    1.25″ SCH10 90 Elbow

    1.25″ SCH10 90 elbow

    304 Stainless Steel

    Long Radios

    £5.50
  • You've just added this product to the cart:

    1.25" SCH10 Equal Tee

    New
    0 out of 5

    1.25″ SCH10 Equal Tee

    1.25″ SCH10 Equal Tee

    304 Stainless Steel

    Ideal for Log Manifolds

    £10.50
  • You've just added this product to the cart:

    Z19DTH Exhaust Flange

    New
    0 out of 5

    Z19DTH Exhaust Flange

    Z19DTH Exhaust Flange

    10mm Lazer Cut Mild Steel

    These are lazer cut to order, please allow 1-2 weeks for cutting and dispatch.

    £30.00
  • You've just added this product to the cart:

    Quick Disconnect Purge Line

    New
    0 out of 5

    Quick Disconnect Purge Line

    GizFabs Quick Disconnect Purge Line

    GizFabs purge line kit is designed to make purging easier and affordable. With the quick release connectors, the purge line can easily be disconnected whilst the piece is moved and easily reconnected. With the flow meter adapter, the purge line can be fully disconnected and stored easily ready to use again. This kit compliments our own Purge Caps.

    • Disconnects and reconnects in Seconds
    • High Quality Crimped Cotton Braided Rubber hose for flexibility, durability and reliability.
    • 1 x 5m (16ft) Purge Line (can be purchased separately to make a longer line)
    • 1 x Flow Meter Adapter (Common 3/8BSP Thread)
    • 1 x Quick Release Adapter

    Save when purchased with a Purge Cap Set

     

    £50.00£60.00
  • You've just added this product to the cart:

    02 Sensor Bung Heatsink

    New
    0 out of 5

    02 Sensor Bung Heatsink

    GizFabs 02 Sensor Heatsink.

    • Helps prevent discoloration of he boss and deformation of the threads.
    • Made from Aluminium.
    • Features Cooling fins and a hex to aid removal with a spanner.
    • M18x1.5 Thread
    £15.00
  • You've just added this product to the cart:

    Nissan Micra K11 Stainless Steel Exhaust Manifold (4-2-1) (Pre-Order)

    0 out of 5

    Nissan Micra K11 Stainless Steel Exhaust Manifold (4-2-1) (Pre-Order)

    Nissan Micra K11 Stainless Steel Exhaust Manifold (Pre-Orders)

    • OEM Replacement, Fits Factory Exhaust System
    • 304 Stainless Steel
    • 38mm Primarys, 44mm Secondary’s, 2″ Collector (4-2-1)
    • Supplied with fitting kit

    Pre-Orders are expected to ship Mid-Late February 2017

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 5-6 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £330.00
  • You've just added this product to the cart:

    Nissan Micra K11 Stainless Steel Exhaust Manifold (4-1) (Pre-Order)

    0 out of 5

    Nissan Micra K11 Stainless Steel Exhaust Manifold (4-1) (Pre-Order)

    Nissan Micra K11 Stainless Steel Exhaust Manifold (Pre-Orders)

    • OEM Replacement, Fits Factory Exhaust System
    • 304 Stainless Steel
    • 38mm Primaries, 2″ Collector
    • Supplied with fitting kit

    Pre-Orders are expected to ship Mid-Late February 2017

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 5-6 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £270.00
  • You've just added this product to the cart:

    Vauxhall F23/M32 Gearbox Cooler Kit

    0 out of 5

    Vauxhall F23/M32 Gearbox Cooler Kit

    Vauxhall Gearbox Cooler Kit

     

    • SETRAB Oil Cooler.
    • AN Fittings and PTFE lines throughout for reliability (Colour Options Available).
    • Quality gear driven pump.
    • Additional Wiring Required
    • Professional Installation Recommended

     

    This Gearbox Oil Cooler kit is aimed towards Motorsport applications. The main weakness of the M32 gearboxes for example, is earlier variations suffer from bearing failure due to a lack of lubrication to case end bearings caused by a low lubrication capacity and overheating. This was partly rectified in the later boxes were revised with larger case end bearings. However, these revised gearboxes are still prone to failure.

     

    This kit will allow you to run a remote oil cooler and pump allowing an increase in lubrication capacity. The increase in capacity also helps reduce the temperature of the gearbox fluid, reducing the risk of gearbox failure.

     

    (Please note the image is a representation of part of the kits contents – Image will be updated once another kit has been built)

     

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 3-4 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £350.00
  • You've just added this product to the cart:

    Universal Pie Cut Exhaust Tip

    0 out of 5

    Universal Pie Cut Exhaust Tip

    Universal Pie Cut Exhaust Tip

     

    • Hand Made TIG Welded Pie Cuts
    • 2″ leg with 4 Pie Cuts
    • 304 Stainless Steel
    • Available in several tubing sizes
    • Professional Fitting required

    These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive.

    £50.00
  • You've just added this product to the cart:

    Nissan Micra K11 Silenced De-Cat

    0 out of 5

    Nissan Micra K11 Silenced De-Cat

    Nissan Micra K11 Silenced De-Cat

    2″ Silenced De-Cat suitable for Pre-Facelift models that have an under-floor cat.

    All items are TIG Welded.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £85.00
  • You've just added this product to the cart:

    Stock Car Roof Fin

    0 out of 5

    Stock Car Roof Fin

    Stock Car Rear 1/4 Number Fins
     

    • Mild Steel
    • Dimple Die Swaged holes for weight reduction and strength.

     
    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C's before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £30.00
  • You've just added this product to the cart:

    Stock Car Rear Quarter Number Fins

    0 out of 5

    Stock Car Rear Quarter Number Fins

    Stock Car Rear 1/4 Number Fins
     

    • Mild Steel
    • Dimple Die Swaged holes for weight reduction and strength.

     
    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C's before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £30.00
  • You've just added this product to the cart:

    Nissan Micra K11 Turbo Manifold and Downpipe Kit

    0 out of 5

    Nissan Micra K11 Turbo Manifold and Downpipe Kit

    Nissan Micra K11 Turbo LOG Manifold and Downpipe Kit

    • LOG Manifold and downpipe
    • Can be made to suit most common frame turbos (Flange options listed)
    • Manifold and Down pipe to suit.
    • External Wastegate options, with the ability to select external screamer or recirulated dump.
    • Down pipe fits to factory center exhaust.
    • Downpipe size is 2.5″

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 5-6 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £440.00£540.00
  • You've just added this product to the cart:

    Nissan Micra K11 Stainless Sports Exhaust

    0 out of 5

    Nissan Micra K11 Stainless Sports Exhaust

    Nissan Micra K11 Stainless Sports Exhaust System.

    • TIG welded 2″ 304 Stainless Tubing.
    • Silenced Rear Box with outward Rolled Tip (Size options available)
    • Option for with or without center silencer.
    • Option for both Pre-Facelift and Facelift models (With or Without Secondary Catalytic Converter)
    • Comes with Fitting Kit (New Gaskets, Stainless Hardware and Hanging rubbers)
    • Lifetime Warranty (Subject to Terms and Conditions)

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £270.00£300.00
  • You've just added this product to the cart:

    Honda Integra DC5 Battery Relocation Bracket

    0 out of 5

    Honda Integra DC5 Battery Relocation Bracket

    Honda Integra DC5 Battery Relocation Bracket

    Battery Relocation bracket for Integra DC5 to suit Oddessy PC680 battery, or similar sized battery.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £85.00
  • You've just added this product to the cart:

    Vauxhall F23/M32 Gearbox Breather Kit (AN Version)

    0 out of 5

    Vauxhall F23/M32 Gearbox Breather Kit (AN Version)

    Vauxhall Gearbox Breather Kit

    AN Fitting Version

    These gearbox breather kits, relocate the breather on the gearbox, to a new, higher point in the engine bay. Blanking off the Factory breather hole and using our unique tank allows you to overfill the gearbox approx 0.5-1 liter, in turn protecting and pro-longing the life and reliability of your gearbox by increasing cooling capacity through the means of additional transition fluid.

    Kit comes with all necessary fixtures and fittings.

    Unfortunately, we cannot offer any colour options for the 80mm tank filters. They are an Un-Dyed cotton and could easily be dyed to a colour of your choice.

    Some drilling may be required.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £90.00£105.00
  • You've just added this product to the cart:

    Vauxhall F23/M32 Gearbox Breather Kit (Silicone Version)

    0 out of 5

    Vauxhall F23/M32 Gearbox Breather Kit (Silicone Version)

    Vauxhall Gearbox Breather Kit

    These gearbox breather kits, relocate the breather on the gearbox, to a new, higher point in the engine bay. Blanking off the Factory breather hole and using our unique tank allows you to overfill the gearbox approx 0.5-1 liter, in turn protecting and pro-longing the life and reliability of your gearbox by increasing cooling capacity through the means of additional transition fluid.

    Kit comes with all necessary fixtures and fittings.

    Unfortunately, we cannot offer any colour options for the 80mm tank filters. They are an Un-Dyed cotton and could easily be dyed to a colour of your choice.

    Some drilling may be required.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £70.00£85.00
  • You've just added this product to the cart:

    Nissan Micra K11 Rear Exhaust Sports Box

    0 out of 5

    Nissan Micra K11 Rear Exhaust Sports Box

    Nissan Micra K11 Rear Exhaust Sports Box

    • TIG Welded 2″ Stainless Steel Tubing
    • 4″ Round Silencer
    • Outward Rolled Tip (Sizes Available)
    • Full Fitting Kit Included (Gasket, Fitting Hardware and Mounting Rubbers)
    • Options for both Facelift and Pre-Facelift models (Some Trimming of the bumper maybe required)
    • Lifetime Warranty (Subject to Terms and Conditions)

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £150.00
  • You've just added this product to the cart:

    Vauxhall Z20 Garrett Conversion Intake

    0 out of 5

    Vauxhall Z20 Garrett Conversion Intake

    Vauxhall Z20 Garrett Conversion Intake

    Designed to be used with Garrett Conversions

    Our Kit Includes.
    Aluminium Intake Tube x 1 (With or Without PCV/ Recirc)
    Silicone Joiner x 1
    Stainless Clamps x 3
    Air Filter x 1 (Optional)

    Its important to note that the vehicle will require a remap to fit this intake. its important that you do not fit this intake until the vehicle is being mapped. failure to do so can cause serious damage to your engine.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £140.00£180.00
  • You've just added this product to the cart:

    Vauxhall Z20 Garrett Conversion Intake (MAF-less)

    0 out of 5

    Vauxhall Z20 Garrett Conversion Intake (MAF-less)

    Vauxhall Z20 Garrett Conversion Intake (MAF-less)

    Designed to be used with Garrett Conversions

    THIS IS A MAF-LESS VERSION. Please see our other listing “with” MAF Sensor. 1/8 NPT Bung fitted on the underside for sensor take off.

    Our Kit Includes.
    Aluminium Intake Tube x 1 (With or Without PCV/ Recirc)
    Silicone Joiner x 1
    Stainless Clamps x 3
    Air Filter x 1 (Optional)

    Its important to note that the vehicle will require a remap to fit this intake. its important that you do not fit this intake until the vehicle is being mapped. failure to do so can cause serious damage to your engine.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £120.00£160.00
  • You've just added this product to the cart:

    Nissan Micra K11 Intercooler Kit

    0 out of 5

    Nissan Micra K11 Intercooler Kit

    Nissan Micra K11 Intercooler Kit

    Intercooler kit fabricated to suit your turbo setup.

    Price includes intercooler, pipework and associated fittings

    Please note, we will require your manifold and turbo in order to fabricate this kit for you if we are not making this for you. Fitting this kit may require some modifications to metalwork.

    Please note, images show a used Intercooler core, please note a NEW core will be supplied.

    PLEASE CONTACT US BEFORE PURCHASING THIS ITEM.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 5-6 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

     

    £280.00
  • You've just added this product to the cart:

    Nissan Micra K11 Carb/ Throttle Body Manifold

    0 out of 5

    Nissan Micra K11 Carb/ Throttle Body Manifold

    Nissan Micra K11 Carb/ Throttle Body Manifold

    Carb/ Throttle body manifold suited to any bodies of your choice. Vacuum take offs on each runner.

    Please note, you will need to send the bodies you are using to us in order to make the manifold. The bodies will be returned to you upon completion and included in the shipping price.

    Price is for Manifold only, no fixtures or fittings included.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £120.00
  • You've just added this product to the cart:

    Nissan Micra K11 Rear Exhaust Pipe "NoiseMaker"

    0 out of 5

    Nissan Micra K11 Rear Exhaust Pipe “NoiseMaker”

    Nissan Micra K11 Rear Exhaust Pipe “NoiseMaker”

    • TIG Welded 2″ Stainless Steel Tubing.
    • 2.5″ Megaphone Non-Silenced style Tip.
    • Will fit the factory exhaust system and any other system that uses the factory mounting locations.
    • Fitting Kit Included (Gasket and Stainless Fitting Hardware)
    • Option for both Facelift and Pre-Facelift bumpers
    • Optional Baffle available designed to reduce the noise level of the system.
    • Bumper May Require Triming.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    (Please note, vehicle in sound clip still has factory Manifold, Cat and Center silencer still fitted)


    £120.00£150.00
  • You've just added this product to the cart:

    Nissan Micra K11 Mini-Ram Turbo Manifold

    0 out of 5

    Nissan Micra K11 Mini-Ram Turbo Manifold

    GizFabs Own Nissan Micra Mini-Ram Turbo Manifold

    Designed for the Nissan CG Engine as fitted in the Micra's. This Bottom Mount Mini-Ram Manifold is suited for builds looking for an increase in power. Our Mini-Rams have excellent cylinder scavenging properties not found on a conventional LOG Manifold and will support up to 400hp.

    This Manifold is fully stainless including both flanges and is fully TIG welded and Back purged (Where possible) to ensure maximum strength, durability and reliability.

    Using this manifold will require the vehicle to have a Top or Rear mounted alternator for intake and exhaust clearance. Not suitable for models with Air-con.

    This manifold is covered by a Lifetime warranty (Subject to T&C's)

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 5-6 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C's before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £350.00£380.00
  • You've just added this product to the cart:

    Stock Car Fuel Tank (Injection Version)

    0 out of 5

    Stock Car Fuel Tank (Injection Version)

    Stock Car Fuel Tank (Injection)

    This tank comes with the pump built into the tank, ideal for vehicles retaining the fuel injection.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C's before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £95.00
  • You've just added this product to the cart:

    Stock Car Fuel Tank (Carb Version)

    0 out of 5

    Stock Car Fuel Tank (Carb Version)

    Stock Car Fuel Tank (Carb)

    4 Liters (200x200x100mm)
    7.5 Liters (250x250x125mm)

    1 x Fuel Feed
    1 x Fuel Return

    Optional
    1 x Fuel Return

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £70.00£80.00
  • You've just added this product to the cart:

    Honda Civic & CRX 88-91 Dimple Die Slam Panel

    0 out of 5

    Honda Civic & CRX 88-91 Dimple Die Slam Panel

    88-91 Honda Civic/ CRX Dimple Die Slam Panel

    For use on vehicles that use aftermarket bonnet pins/ catches. Eliminating the use for the factory bonnet catch system. This panel weighs half as much as the factory panel.

    Available in 3 arrangements.
    1.5″ Swaged holes with (7 holes)
    1″ Swaged holes with (7 Holes)
    1″ Swaged holes with (8 Holes)

    Will fit Hatch, CRX, Sedan and Shuttle.

    Panel is shipped bare metal, Some drilling is required.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 1-2 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C's before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £30.00
  • You've just added this product to the cart:

    Mazda MX5 Turbo Log Manifold DIY Kit

    0 out of 5

    Mazda MX5 Turbo Log Manifold DIY Kit

    Mazda MX5 Turbo Log Manifold (DIY Kit)

    Fancy Having a go yourself? This kit includes all the needed components to make a manifold.

    Couple of flange options in the drop down menu.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C's before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £165.00£195.00
  • You've just added this product to the cart:

    Nissan Micra K11 Turbo Log Manifold DIY Kit

    0 out of 5

    Nissan Micra K11 Turbo Log Manifold DIY Kit

    Nissan Micra K11 Turbo Log Manifold (DIY Kit)

    Fancy Having a go yourself? This kit includes all the needed components to make a manifold.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C's before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £165.00£195.00
  • You've just added this product to the cart:

    Vauxhall VXR Catch Tank Kit

    0 out of 5

    Vauxhall VXR Catch Tank Kit

    Vauxhall VXR Catch Tank Kit

    • Suitable for both the Astra VXR and Zafira VXR
    • This kit is an Atmospheric type with top mount flush fit filter.
    • 3 Stage Internal Baffle

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £65.00£80.00
  • You've just added this product to the cart:

    Nissan Micra K11 Stainless Center Exhaust

    0 out of 5

    Nissan Micra K11 Stainless Center Exhaust

    Nissan Micra K11 Center Exhaust

     

    • TIG welded 2″ 304 Stainless Tubing
    • Direct Fit and compatible will the OEM Exhaust components
    • Option for with or without silencer.
    • Option for both Pre-Facelift and Facelift models (With or Without Secondary Catalytic Converter)
    • Fitting Kit Supplied

     

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £130.00£160.00
  • You've just added this product to the cart:

    Vauxhall Z20 Top Hat

    0 out of 5

    Vauxhall Z20 Top Hat

    Vauxhall Z20 Top Hat

    • TIG Welded 2.5″ Stainless Steel Top Hat
    • Comes with 4 new Stainless Steel bolts

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £45.00
  • You've just added this product to the cart:

    Vauxhall Z20 Top Hat Kit

    0 out of 5

    Vauxhall Z20 Top Hat Kit

    Vauxhall Z20 Top Hat Kit

    2.5″ Stainless Steel Top Hat and MAP Tube Kit
    Silicone Joiners x 2
    Stainless Clamps x 4
    Stainless Top Hat bolts x 4

    Suitable for aftermarket intercoolers (Such as an Airtec etc)

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £165.00
0

Your Cart