Product Tag - gsi

  • You've just added this product to the cart:

    Vauxhall F23/M32 Gearbox Cooler Kit

    0 out of 5

    Vauxhall F23/M32 Gearbox Cooler Kit

    Vauxhall Gearbox Cooler Kit

     

    • SETRAB Oil Cooler.
    • AN Fittings and PTFE lines throughout for reliability (Colour Options Available).
    • Quality gear driven pump.
    • Additional Wiring Required
    • Professional Installation Recommended

     

    This Gearbox Oil Cooler kit is aimed towards Motorsport applications. The main weakness of the M32 gearboxes for example, is earlier variations suffer from bearing failure due to a lack of lubrication to case end bearings caused by a low lubrication capacity and overheating. This was partly rectified in the later boxes were revised with larger case end bearings. However, these revised gearboxes are still prone to failure.

     

    This kit will allow you to run a remote oil cooler and pump allowing an increase in lubrication capacity. The increase in capacity also helps reduce the temperature of the gearbox fluid, reducing the risk of gearbox failure.

     

    (Please note the image is a representation of part of the kits contents – Image will be updated once another kit has been built)

     

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 3-4 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £350.00
  • You've just added this product to the cart:

    Vauxhall F23/M32 Gearbox Breather Kit (AN Version)

    0 out of 5

    Vauxhall F23/M32 Gearbox Breather Kit (AN Version)

    Vauxhall Gearbox Breather Kit

    AN Fitting Version

    These gearbox breather kits, relocate the breather on the gearbox, to a new, higher point in the engine bay. Blanking off the Factory breather hole and using our unique tank allows you to overfill the gearbox approx 0.5-1 liter, in turn protecting and pro-longing the life and reliability of your gearbox by increasing cooling capacity through the means of additional transition fluid.

    Kit comes with all necessary fixtures and fittings.

    Unfortunately, we cannot offer any colour options for the 80mm tank filters. They are an Un-Dyed cotton and could easily be dyed to a colour of your choice.

    Some drilling may be required.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £90.00£105.00
  • You've just added this product to the cart:

    Vauxhall F23/M32 Gearbox Breather Kit (Silicone Version)

    0 out of 5

    Vauxhall F23/M32 Gearbox Breather Kit (Silicone Version)

    Vauxhall Gearbox Breather Kit

    These gearbox breather kits, relocate the breather on the gearbox, to a new, higher point in the engine bay. Blanking off the Factory breather hole and using our unique tank allows you to overfill the gearbox approx 0.5-1 liter, in turn protecting and pro-longing the life and reliability of your gearbox by increasing cooling capacity through the means of additional transition fluid.

    Kit comes with all necessary fixtures and fittings.

    Unfortunately, we cannot offer any colour options for the 80mm tank filters. They are an Un-Dyed cotton and could easily be dyed to a colour of your choice.

    Some drilling may be required.

    *****************************
    Lead Time
    *****************************
    Please note before your purchase. These are hand made made to order, therefore please allow up to 2-3 weeks for your order to arrive. If you require the part urgently, please send us a message before you purchase

    *****************************
    Terms and Conditions
    *****************************
    This Product is subject to our terms and conditions, therefore please take the time to read our T&C’s before you purchase.
    http://gizfab.com/terms.htm

    *****************************
    Shipping
    *****************************
    We will ship worldwide. If you are unable to complete shipping due to your country, please message us with your address so the shipping tables can be corrected so you are able to place your order

    £70.00£85.00
0

Your Cart